Ceramic Materials Pan Type Concrete Mixer Durable Tool PMC750 PCCP Water Pipe

The use of mixer

1. Before use, an empty test machine shall be used. Before the test machine, the firmness of all the connecting parts of the machine table shall be checked first, especially if the bearing part is loose during transportation, the main switch is closed, and the power supply is conducted.
2. Empty test machine test. The mixer was put into production only when abnormal sounds, high temperature of bearing gears, and other undesirable phenomena were not found.
3. If abnormal vibrations or strange sounds are detected during use, stop the mixer and perform a thorough inspection.
4. The load should not be too large. It is generally measured by the load of the motor. The load current of the 380V motor when stirring the material should not exceed 6 amps. If it exceeds the load, the stirring capacity should be reduced immediately.
5. The management personnel must be familiar with the technical performance, internal structure, control structure, and use principle of the mixer. Do not leave the workplace during operation to prevent malfunctions and damage to mechanical parts, so as to ensure safe production.

Principle of Motion: Mixing with no hidden corners in the mixing pan by installing mixing tools and scraper tools on a specially designed drive system. The mixing track as follows.

Ceramic Materials Precast Concrete Mixer Durable Tool PMC4000

Performance Characteristics

1) Low Energy Consumption, 30% to 50% reduced comparing same capacity mixers!
2) High Homogenization up to 97-99%!
3) Short Mixing Time as 1-3min!
4) Simple Structure, Simple and Convenient Maintenance
5) Flexible Layout, 1-3 unloading doors are optional for different production lines.
6) Compact Structure and Small Space required


Temperature and moisture sensor

To ensure concrete and prefabricated parts quality, sensors of temperature and moisture made in Bikotronic of German can be selected
Hydraulic Coupling
High Pressure Washing System

Control system

The control system can automatically control the process of dosing, mixing, and discharging.

Spare parts

Spare parts can be supplied at any time.