High Speed Operation Vertical Shaft Concrete Mixer With Refractory Materials 30kw

Wear - Resistant Alloy Plates Vertical Shaft Concrete Mixer Ceramic Materials

Performance characteristics

1. Complete machine design, performance optimization

2. Easy to use and maintain;

3. Firm and reliable, lifespan plant;

4. Good mixing quality and high efficiency

5. Easy to operate, fast discharging

6. Low energy consumption, low noise

The use of mixer

1.Before use, an empty test machine shall be used. Before the test machine, the firmness of all the connecting parts of the machine table shall be checked first, especially if the bearing part is loose during transportation, the main switch is closed, and the power supply is conducted. Air running test machine.

2. Empty test machine test. The mixer was put into production only when abnormal sounds, high temperature of bearing gears, and other undesirable phenomena were not found.

3. If abnormal vibrations or strange sounds are detected during use, stop the mixer and perform a thorough inspection.

4. The load should not be too large. It is generally measured by the load of the motor. The load current of the 380V motor when stirring the material should not exceed 6 amps. If it exceeds the load, the stirring capacity should be reduced immediately.

5. The management personnel must be familiar with the technical performance, internal structure, control structure, and use principle of the mixer. Do not leave the workplace during operation to prevent malfunctions and damage to mechanical parts, so as to ensure safe production.

Principle of Motion: Mixing with no hidden corners in the mixing pan by installing mixing tools and

scraper tools on a specially designed drive system. The mixing track as follows.