Anti - Wear Castable Mixer Machine Compact Structure For Light Soil Cement Slurry

1-3 Unloading Doors Refractory Mixer Machine Ceramic Materials Long Life

Performance Characteristics:

1) Low Energy Consumption, 30% to 50% reduced comparing same capacity mixers!

2) High Homogenization up to 97-99%!

3) Short Mixing Time as 1-3min!

4) Simple Structure, Simple and Convenient Maintenance

5) Flexible Layout, 1-3 unloading doors are optional for different production lines.

6) Compact Structure and Small Space required

Operation Instruction

The instruction must be followed during operation

1. Do not run over loaded;

2. Discharge material in the trough after an emergency stops. Start with load is forbidden;

3. After each shift, clean the trough, tools, check the tightness of nuts, and open and close the discharging door Several times to ensure it works smoothly,

Check the blades and tiles weekly and replace them if necessary;

4. The anti-wear parts made by our company must be used to avoid any damage to the machine;

5. Stay away from the discharging area to avoid any injury to workers.

APPLICATION INDUSTRIES

1. Concrete

Precast concrete: various block bricks, sleepers, track slabs, metro tunnel segments, PC components, PCCP water pipe,

Lightweight aggregate concrete: Light soil cement slurry,polyphenylene granule cement slurry, other lightweight aggregate concrete,

High Performance ready-mixed concrete: Self-leveling mortar, etc.

2. Ceramics,

3. Pot Clay,

4. Glass Raw Material,

5. Refractories: Unshaped refractories, refractory bricks,

6. Casting materials: Sand mixing, casting coatings,

Others

Principle of Motion: Mixing with no hidden corners in the mixing pan by installing mixing tools and scraper tools on a specially designed drive system. The mixing track as follows.